AD1000 High Frequency PCB 30mil 0.765mm Double Sided RF PCB DK 10.2 PWB with Immersion Gold

AD1000 High Frequency PCB 30mil 0.765mm Double Sided RF PCB DK 10.2 PWB with Immersion Gold
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
 
Brief Introduction
This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate.
The circuit board is dual layers with finished 1oz copper. No solder mask and silkscreen. Both layers are fully exposed
to air. It’s 0.8mm thick and 50 boards are vacuum packed for shipment.
 
Typical Applications:
1. Aircraft Collision Avoidance Systems (TCAS)
2. Ground Based Radar Surveillance Systems
3. Low Noise Amplifiers (LNAs)
4. Miniaturized Circuitry & Patch Antennas
5. Power Amplifiers (PAs)
6. Radar Modules and Manifolds
7. X-Band and Below
 
PCB Specifications

 

 
Other Available RF PCB Material
FR-4 Tg>135, High Tg>170 FR-4 ( S1000-2M, TU-872 SLK, TU-768, IT-180A etc.)
Rogers RO4350B, RO4003C, RO4730G3, RO4360G2, RO4533, RO4534, RO4535, RO3003, RO3035,
RO3006, RO3010, RO3210, RO3203, etc.
Rogers RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC etc.
Rogers TMM4, TMM10, Kappa 438 etc.
PTFE F4B DK2.2, DK2.65
Taconic TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-5, TLY-3, RF-10, RF-35TC, RF-35, RF-35A2, TLF-35,
RF-60A, RF-60TC, RF-45, TRF-45 etc.
AD450, AD600, AD1000, TC350 etc.
Metal core PCB, 1W/MK-3W/MK material
Flexible PCB
Megtron 6 (M6) R-5775G
 
Our PCB Services
PCB prototypes
Mass volume production
Single sided PCB
Double sided PCB
Multilayer PCB up to 32 layers
Heavy copper PCB
Hybrid PCB
Impedance controlled PCB
Via in pad PCB
Ball grid array (BGA) PCB
Blind via PCB
Countersink holes, half hole, press-fit hole
Quick turn-around (QTA) Delivery
No Minimum Order Quantity (MOQ)
Door to Door shipment service
 
CAPABILITY
2500-3000 types each month.
 
SERVICE AREA
North America, Oceania, Southeast Asia, Eastern Europe, Africa, Latin America, Western & Southern Europe,
Northern Europe, Central & South Asian, Middle East.
 

Manufacturing Process of Dual Layer PTH PCB

The immersion gold and HASL PCB are proceeding as following steps: (1). Material Shearing --> (2). Drilling -->

(3). PTH --> (4). Dry Film (Circuit) --> (5). Pattern Plating --> (6). Etching --> (7). Solder Mask --> (8). Silkscreen -->

(9). Surface Finish --> (10). Profile Contour --> (11). V-groove --> (12). Electrical Test --> (13). Packaging -->(14). Delivery
 

 
We can provide you with prototypes, small batches and mass production. Any enquiry, please feel free to contact us.