| |
Taconic TLX-9 DK2.50 Df0.0019 (0.13-3.18mm+) PTFE/Woven Glass Laminate
Brief Introduction
Taconic TLX laminates are PTFE/woven glass copper-clad laminates manufactured with over 35 years of coating experience. TLX-9 features a dielectric constant of 2.50 ±0.04 and dissipation factor of 0.0019 at 10 GHz. These materials offer exceptionally well-controlled electrical and mechanical properties, with excellent dimensional stability and virtually no moisture absorption during fabrication.
Technical Features & Benefits
- Excellent mechanical and thermal properties
- Low and stable dielectric constant
- Tightly controlled dielectric constant (±0.04)
- Low dissipation factor (0.0019 @ 10 GHz)
- UL 94 V-0 flammability rating
- Virtually no moisture absorption (<0.02%)
- High dielectric breakdown (>60 kV)
- Excellent dimensional stability
- Can be sheared, drilled, milled, and plated using standard PTFE/woven glass methods
Typical Properties: TLX-9
| Property |
Test Method |
Units |
Value |
| Electrical Properties | | | |
| Dielectric Constant @ 10 GHz | IPC-TM 650 2.5.5.5 | | 2.50 |
| Dissipation Factor @ 10 GHz | IPC-TM 650 2.5.5.5 | | 0.0019 |
| Dielectric Breakdown | IPC-TM 650 2.5.6 | kV | >60 |
| Volume Resistivity | IPC-TM 650 2.5.17.1 | MΩ·cm | 10⁷ |
| Surface Resistivity | IPC-TM 650 2.5.17.1 | MΩ | 10⁷ |
| Arc Resistance | IPC-TM 650 2.5.1 | seconds | >180 |
| Mechanical Properties | | | |
| Flexural Strength (Lengthwise) | IPC-TM 650 2.4.4 | lbs/in² | >23,000 |
| Flexural Strength (Crosswise) | IPC-TM 650 2.4.4 | lbs/in² | >19,000 |
| Peel Strength (1 oz copper) | IPC-TM 650 2.4.8 | lbs/linear in | 12.0 |
| Thermal Properties | | | |
| Thermal Conductivity | ASTM F 433 | W/m/K | 0.19 |
| x-y CTE | ASTM D 3386 (TMA) | ppm/°C | 9-12 |
| z CTE | ASTM D 3386 (TMA) | ppm/°C | 130-145 |
| Physical Properties | | | |
| Moisture Absorption | IPC-TM 650 2.6.2.1 | % | <0.02 |
| Flammability Rating | UL-94 | | V-0 |
Application Areas
- LNAs, LNBs, and LNCs
- PCS/PCN Large Format Antennas
- High Power Amplifiers
- Passive Components
- Radar Systems
- Phased Array Antennas
- Mobile Communication Systems
- Microwave Test Equipment
- Microwave Transmission Devices
- RF Components
Available Configurations
- Dielectric Constant: 2.50 ± 0.04.
- Dielectric Thickness: Available in a wide range starting from 0.0050 inches (0.13 mm), typically covering thicknesses from 0.13 mm up to 0.78 mm and above.
- Standard Sheet Size: 36" x 48" (914mm x 1220mm)
- Typical Panel Sizes Available: 12" x 18" (304mm x 457mm), 16" x 18" (406mm x 457mm), 18" x 24" (457mm x 610mm), 16" x 36" (406mm x 914mm), 24" x 36" (610mm x 914mm), 18" x 48" (457mm x 1220mm)
- Copper Cladding Options (Electrodeposited): CH: ½ oz./sq. ft. (~0.0007" / ~18 μm), C1: 1 oz./sq. ft. (~0.0014" / ~35 μm), C2: 2 oz./sq. ft. (~0.0028" / ~70 μm)
- Ordering Example: TLX-9-0310-CH/CH-18" x 24" (or TLX-9-0310-CH/CH-457mm x 610mm)
|
|
.jpg)
.jpg)
.jpg)
.jpg)
